Alpha DPX 2kW Fault Managed Power Distribution Module with EnShield™ Technology

The DPX 2kW Fault Managed Power Distribution Module with EnShield™ Technology is part of the distributed power transport product family specifically engineered using the new Alliance for Telecommunications Industry Solutions (ATIS) fault managed power distribution technology. The converter module can deliver 2000 watts of power at ±190 Vdc.

Request a Quote
select a product's specifications tab

In a compact, fan-cooled design, the DPX 2kW Fault Managed Power Distribution Module with EnShield™ technology delivers 100 percent nominal power up to 65°C (149°F).

Local and remote setup, adjustment and control are a simple single-step process with the system controller. Complete configuration and monitoring of power equipment is possible through a network web browser or via a local display.

Distributed power transport architecture enables operators to deploy their network faster by eliminating the need to have AC utility power at each small cell location. At a central location, the central power hub converts the incoming AC power to fault managed power which is transported over a hybrid or copper only cable to a disconnect box and then to a down converter device located approximately 6000 ft away. This reduces installation and operating expenses, and provides flexibility related to site selection for the installation of the remote communications equipment.

Request a Quote
  • Compliant with Alliance for Telecommunications Industry Solutions (ATIS) fault managed power distribution technology safety standards and UL1400-1 (pending)
  • Rapid fault detection (line-ground and line-line) and shutdown protection in the event of incidental human contact
  • Intelligent power flow control towards DPX 1350W Downconverter
  • High operating temperature range up to 65°C (149°F) for deployment in the harshest outdoor environments
  • Individual channel monitoring and power cycling via the Cordex® CXC HP system controller

Product Specification

Take a look at the following DPX 2kW Fault Managed Power Distribution Module with EnShield™ Technology product specification:

Product Type

Outdoor Line Power Systems

Application

Small Cells

Outdoor Small Cells

Output Power

2000 W nominal

Regulation

<±3%

Dimensions H x W x D (inches)

3.3 × 3.3 × 15.0

Dimensions H x W x D (mm)

84.3 × 84.6 × 380.3

Net Weight (lb)

14

Net Weight (kg)

6.6

Temperature

–40 to 65°C (–40 to 149°F)

Humidity

5 to 95% non-condensing

Elevation

Up to 3000 m (9842 ft)

Alpha DPX Power Source Enclosure System

View Details

Alpha DPX 1500W Downconverter

View Details

Alpha DPX 5kW Rectifier

View Details

Alpha DPX 5kW Bi-Directional Converter

View Details

Alpha DPX Disconnect and Junction Box

View Details

Alpha DPX Ground Fault Monitoring Device (GFD) Peripheral

View Details